Products
PRODUCT DESCRIPTION 產品概說 |
Plug valves are covered with EPDM, which enhance the sealing ability and prevent leakage when the valve is closed.
閥栓採用高級橡膠包覆,在閥栓關閉時,能有效關斷,避免滲漏。
When the plug valve opens, the plug immediately shifts away from the valve seat. Once the plug's edge is aligned
with the upper edge body, it is considered the open position of the valve.
當栓塞開啟時,栓塞與閥座立即偏移,待栓塞至貼近管線上緣時,即為閥開啟位置。
When used in elevated drainage systems, plug valves primarily serve as the shut-off valve and do not have flow control
capabilities; therefore, they should be installed at the pipeline outlet to ensure the valve can function adequately.
用於高架排水系統時,因其栓塞閥主要功能在於全關/全開等狀態,並無調流功能,所以裝設栓塞閥應將
栓塞面對出水口的位置安裝,確保閥能發揮正常開/關等功能。
Applicable for sewage plant's pipeline and relative facility.
應將栓塞面對出水口的位置安裝,確保閥能發揮正常開/關等功能。
PRODUCT FEATURES 設計特點 |
The internal design of the valve body creates turbulence to prevent sedimentation of silt and sand inside the valve.
The flow area can reach more than 80%, reducing the accumulation of impurities buildup over time.
閥體內部特殊設計,使閥體內部產生擾流,避免泥沙沉積,其水流面積可達80%以上,減少雜質淤積於閥體內。
The eccentric design is deployed to the shaft and the seat to make the operation more efficient and reduce wear between parts.
閥座與閥軸採偏心式設計,使操作更為省力,並有效降低閥座磨損。
Adjustable valve stem packing design allows users to adjust on-site without disassembling the attached driving module.
可調整式閥軸填料設計,可在現場隨時調整,不必拆卸操作機。
Handle type, worm gear type, or motorized are available upon customer request.
可依實際需要選擇把手式、渦齒式、或電動機操作方式。